Halloween Costume on a Budget – Sorcerer Mickey Mouse

Halloween Costume on a Budget - Sorcerer Mickey Mouse

Isn’t this Sorcerer Mickey Mouse costume Fantasmic!, err…fantastic?! And it’s budget-friendly and fairly easy to make as well. It’s all about the sorcerer hat, naturally. The rest of the costume is extremely easy to pull together last minute.

My son was Mickey Mouse last year (see the quick and easy DIY Mickey costume tutorial). He’s been telling us all for months that he wanted to be Mickey again this year too. I showed him the animated short, The Sorcerer’s Apprentice and he was excited to switch things up a bit costume-wise and be Sorcerer Mickey this year.

Halloween Costume on a Budget - Sorcerer Mickey Mouse


SORCERER’S HAT

Working from top to bottom, Yen Sid’s sorcerer hat is the winning part of this costume. I will give you several different options for creating this piece and you can choose, depending upon your skill level and craftiness.

These are the things you’ll need for the sorcerer’s hat-

1. Cut two pieces of blue cotton from the cone hat pattern. Cut one piece of buckram from the same pattern. Sandwich the buckram in between the two blue cotton pieces and baste around the edge to hold all three pieces together.

2. There are several ways to make the mouse ears. I cut mine out of stiff black felt (just simple circles with a tab on one side to attach to the hat). Curve the hat around your child’s head to see where the placement should be for the ears and mark it with disappearing ink. I sewed the tab on to the hat (facing the back of the hat) but you could hot glue as well.

Halloween Costume on a Budget - Sorcerer Mickey Mouse

3. To create the stars and moons on the hat there are two options:

Option A – Free hand draw these designs onto Heat n’ Bond. Iron the shapes onto white cotton fabric. Cut out on the lines and iron directly onto one of the blue cotton pieces of the hat. Take care not to place the pieces too close to the edge where the hat will be seamed together.

Option B – Draw the designs onto a piece of pattern to create a pattern. Using the patterns, cut out the shapes with felt and then hot glue onto the blue cotton. Take care not to place the pieces too close to the edge where the hat will be seamed together.

4. Curve the cone into a conical hat shape. At this point you have several options for seaming together.

Option A- I turned my hat inside out and machine sewed down the seam, then carefully turned right side out.

Option B- You could also overlap the hat seam and use heavy-duty staples to  seam it shut. You could then cover the seam with a hot-glued strip of blue ribbon.

5. For the padded hat band, measure the child’s head circumference where the hat will be worn. Add about 10 inches to this measurement as the band will tighten once the stuffing is added. It’s also easier to cut the band down in size than to add another piece of fabric.

6. Cut a piece of blue cotton 6″ high X the head circumference, plus 10″. Fold the cotton in half (so it’s now 3″ high), right sides together and sew the long end of the fabric, creating a tube. Do NOT turn the piece right side out, you will be stuffing this tube while it’s inside out.

7. Place a safety pin about an inch in from one side, closing off the tube. Stuff the tube with Poly-fill through the opposite end, using a dowel or chopstick to lightly push the stuffing down. You want the tube lightly padded but not bursting at the seams.

8. When the tube is padded, compare this hat band to the bottom of the cone hat. You may need to remove some of the fill and trim some of the tube fabric if the tube is too long. Once you have the tube an appropriate size to fit the hat, sew the tube ends together making a circle.

9. Placing right sides together, pin the hem of the tube to the outside of the cone hat and baste. Then using a sewing machine zipper foot, sew the hat band tube closely inside the basting line to secure the band to the hat. Trim excess and roll band down. Ta-da!! Your sorcerer’s hat is complete!


ROBE & BELT 

For the rest of the costume. I’d had all intentions of making an authentic red Mickey tunic that matched the costume he wears but when it came down to cutting it out, I found I didn’t have enough red cotton. I dug through my drawer and found this red tee shirt which fits my son nicely and doesn’t drag on the ground or cover his hands (I had to turn the tee inside out because it had a logo on it). I paired the tee with black leggings and brown sandals, though any brown shoes would work.

Halloween Costume on a Budget - Sorcerer Mickey Mouse

For the belt, you could choose to purchase a bit of brown rope to knot at the waist. I had brown cotton that I sewed in a strip long enough to wrap around and knot.

And that’s it, a fairly quickly put together Halloween costume. I was able to create the hat in a few hours time and the rest of the outfit was thrown together very fast. And all pieces are very budget-friendly. The hat fabrics didn’t cost me more than a few dollars!


signnature8